1. DMX LED tube light works with DMX512 protocol or TTL signal
  2. Each pixel is Individually addressable
  3. Signal break-point continuous transmission
  4. Light beam angle is 360 degree
  5. DC12V – DC14V input voltage
  6. Signal transmission distance between two tubes can be max 30m for DMX512 signal or 70m for TTL signal,
  7. Built-in signal loopback, signal IN/OUT at same end, no wires on other end
  8. Can programmed through Madrix

Description:

DMX LED tube light works with DMX512 protocol when powered by IC TM512 or UCS512.

The digital DMX light tube can also work with TTL signal when powered by WS2811 or WS2818 addressable IC.

Max signal transmission distance between any two DMX LED tubes are 80 meters because of the built-in signal amplifier, so no externa amplifier is required.

The signal intput & output are at same end of tube, there is embedded signal loopback. This benefit the ease of installation to save labor costs.

This DMX RGB LED digital tube light can be used in stages, shopping malls, exhibition halls, plaza lighting effects, night bars, KTVs, or as guardrail tube, etc.

Thanks to the vast amount of our project experiences, SDIP know very well what could be the potential quality issues and installation problems, we adopt the dedicated production and quality check tactics to reduce potential problem at factory.

Besides the physical strips, SDIP still provide the one-stop services of Site audit, Layout design, Lighting effect and programming based on LedEdit or Madrix software platforms, Product development and implementation, Installation and debugging, we have the field engineer teams to visit your sites for assistance.

Specifications:

Model: SDIP-D26-LEDTUBE

Milky or transparent PC cover, double sides fibreglass board, double sides LEDs. Powered by IC TM512 / UCS512. 360° light emitting, can achieve floating effects working with lifting appliances.

Dimensions: D26*1040mm Signal Protocol: DMX512 / TTL
Voltage: DC12V Signal distance: 70m/30m
Max Power: 28.8W Anti-interference: Opto-isolator
IC: TM512/UCS512 Control Type: Individually addressable
IC Quantity: 60 IC/meter Signal Protection: Break-point signal continuous transmission
LED Type: SMD5050 RGB Installation: Suspension
LED Quantity: 120 LEDs/meter IP rate: IP67
Profile: PC Tube Working Temp: -50°~ 70°
Cover: Milky/Clear PC Customized length: Supported

 

Model: SDIP-D75-LEDTUBE

Aluminum frames with milky PC tube, six sides LED boards powered by UCS512 / TM512 generate 360° light emitting, can achieve floating effects working with lifting appliances.

The built-in signal amplifier enable the signal transmission distance between any 2 tubes to be max 80 meters without extra amplifier.

Dimensions: D75*10100mm Signal Protocol: DMX512 / TTL
Voltage: DC12V Signal distance: 70m/30m
Max Power: 86.4W Anti-interference: Opto-isolator
IC: UCS512 / TM512 Control Type: Individually addressable
IC Quantity: 20 IC/meter Signal Protection: Break-point signal continuous transmission
LED Type: SMD5050 RGB Installation: Suspension
LED Quantity: 360 LEDs/meter IP rate: IP67
Profile: Aluminium alloy Working Temp: -50°~ 70°
Cover: Milky Cover Customized length: Supported

 

DMX LED Tube Applications:

Videos:


We will answer your email shortly!